Spiral Ductwork Machine: Professional Equipment for Producing Spiral Ducts

Due to the inherent performance and low operating costs of spiral ducts, their application in ventilation and air conditioning systems has been continuously promoted. Currently, they are widely used in industries such as shipbuilding, ventilation, purification, bridge dust removal, airports, tunnels, and other construction fields. Therefore, understanding the technological process of spiral duct equipment helps us better grasp the quality of the output products and builds greater confidence in the product. It is necessary for us to be familiar with the manufacturing process steps and safety operation regulations of spiral duct production.

Technical Preparations for the Spiral Ductwork Machine

Before producing spiral ducts, the following technical preparations for the spiral ductwork machine should be made:

• Choose a flat and stable surface for the spiral ductwork machine and secure the machine. The machine's chassis legs can be extended to make the machine panel easier to observe.

  
  

• Insert one end of the power cord plug into the socket on the rear panel of the machine chassis, and the other end into a power supply socket. Please ensure the use of a single-phase three-wire power supply. Then turn on the "main power switch" on the rear panel and press the "power switch" button on the panel. When the green "ready" indicator light turns on, the spiral ductwork machine is ready to operate. Hold the "setting button" and adjust to a suitable value, generally between 0.5 and 2.0 seconds.

  
  

• After the green "ready" indicator light turns on or the internal buzzer emits a short "beep" sound, the next container sealing operation can proceed. Check the sealing quality of the spiral ductwork machine. According to different materials, container diameters, and production efficiency, appropriately adjust the "setting button" to achieve optimal sealing quality.

  
  

Safety Operation Regulations for the Spiral Ductwork Machine

• Operators must hold relevant certifications and have undergone professional training.

  
  

• Before operation, check whether the spiral ductwork machine is functioning properly.

  
  

• It is strictly forbidden to perform maintenance or cleaning while the spiral ductwork machine is running.

  
  

• Operators must wear protective equipment such as gloves and safety goggles during operation.

  
  

• Strictly follow the operation regulations of the spiral ductwork machine; overloading and improper use are prohibited.

  
  

• If a fault or problem occurs with the spiral ductwork machine, immediately stop using it and notify maintenance personnel for handling.

  
  

• Operators must be familiar with the emergency stop device and safety exit procedures of the spiral ductwork machine.

  
  

• Operators are strictly forbidden from consuming alcohol, smoking, or using prohibited substances.

  
  

• During operation, it is prohibited to touch machine parts or moving devices randomly.

  
  

• Keep the area around the spiral ductwork machine clear of debris or other objects that might affect operation and safety.

  
  

In summary, besides understanding the knowledge of the spiral duct production process, it is essential to perform thorough preparations before starting and strictly adhere to the spiral ductwork machine's safety operation regulations. Although these do not directly affect the product, negligence can cause serious consequences. Overall, every step in the manufacturing process of spiral ducts plays an important role and requires careful and patient observation and inspection.