Contact
Focus Us On
DOWNLOAD

The Property Analysis of the Two Malfunctions of the Angle Shearing Machine

Table of Content [Hide]
    In the daily windpipe operation, if according to reasonable means of operation, the working efficiency of the general cutting angle machine is relatively high (of course, the premise is to choose the shearing machine that is suitable for the manufacturer's own needs). If in the work, once the abnormal operation situation appears, the staff needs to stop the working of the cutter and find out the cause of the fault in time.

    Similar to other mechanical obstacle removal methods, the first step of angle shearing machine’s is to analyze the fault source. Generally speaking, according to the property of faults, there are two kinds of failures of the angle shearing machine.

    1. Systematic malfunction

    This means that as long as certain conditions are met, there will inevitably be failures. For example, if the work pressure rises suddenly or drops to a certain value, it will produce abnormal running state; or when the grid voltage is too high and too low, the system will produce a high voltage or low alarm. In addition, if the cutting angle selection is too large at the time of machining, it will inevitably produce overload or over temperature alarm, and the system will quickly shut down.

    2. Random malfunction

    It refers to the angle shearing machine under the same conditions, occasionally there will be one or two faults. Generally, the cause of random failure is difficult to find, because it is not easy to repeat, sometimes it is difficult to encounter for a long time.

    Basically, the cause of this type of malfunction may be related to local loosening and dislocation of the angle shearing machine. For example, in some parts of the angle shearing machine system deviate from the operation characteristics, the quality of components is reduced, and the operation error, improper maintenance and the influence of the working environment. In addition, even if the contact corrosion caused by some switch contamination is not reliable, it may lead to abnormal operation of the shear.

    Therefore, if employees encounter angle shearing machine is not functioning properly, it can be analyzed in accordance with the above two situations.

    References
    Related News
    • The Effect of Lock Forming Machine

      The Effect of Lock Forming Machine

      April 11, 2019How to choose a good lock forming machine? How to choose among many lock forming machine suppliers? Let's look at the role of lock forming machine before we make a choice.1. The minimum length of the ...view
    • What is the Future of Ventilation Ducts?

      What is the Future of Ventilation Ducts?

      July 30, 2018With the rapid growth of China's national economic construction, central air-conditioning technology has also developed rapidly, and new products and technologies are constantly emerging in the fierce...view
    • Common Faults And Solutions of Duct CNC Plasma Cutting Machine

      Common Faults And Solutions of Duct CNC Plasma Cutting Machine

      April 18, 20181. When the machine stops working, the system works, the cutting gun moves in one direction or not, and pressing any key (especially the pause button) doesn't work, it maybe the machine is jammed.Remo...view
    • What Are the Main Standards for the Using Process of the Steel Sheet Cutting Machine?

      What Are the Main Standards for the Using Process of the Steel Sheet Cutting Machine?

      July 30, 2018What are the main standards for the process of using the steel sheet cutting machine? In view of the process of using the steel sheet machine, all matters needing attention have corresponding standard...view
    • How does the Auto Duct Line Work?

      How does the Auto Duct Line Work?

      July 30, 2018One tool that almost every factory uses now is the auto duct line, and all kinds of auto duct line work methodically. Are there any difficulties in the technology of auto duct line? Let's take a quick...view
    • Precision of Hand Folding Machine

      Precision of Hand Folding Machine

      July 30, 2018The hand folding machine should judge its precision from the precise position it has achieved. Therefore, the precision of the hand folding machine should be carefully checked. The precision of the ha...view